1. Connecting to Pix4D
- Turn on controller
- Turn Mavic on
- Plug cable in to controller
- Plug cable into tablet
- “Ctrl+DJI” App should automatically open**
- Wait for status to read “Connected”. You should see live data roll, yaw, pitch etc.
- Click “Open Pix4DCapture” button to open Pix4D
- Clicking the camera icon in the top left corner can verify live connection
**Note: If the DJI GO 4 or Pix4D app auto opens on plugging in the tablet, follow process 2 – “Access DJI GO 4 App” steps a-i for the app that auto opens. Then complete process 3 – “Resetting Ctrl+DJI back to Default”.
**Note: If no app auto opens and several apps pop of to select a default, choose “Ctrl+DJI” app, click “Always”. The app will auto open and connect to aircraft.
2. Access DJI GO 4 App
- Hit home button on tablet (physical button)
- Swipe up from bottom of screen
- Search “settings” in search bar
- Click on “Apps” on left hand side
- Click on “Ctrl+DJI” in the app list
- Scroll down and click on “set as default”
- Click “Clear defaults”
- Click “page button” on left of physical home button
- Click “Close all”
- Search for the DJI GO 4 app
- If a pop up asks for permission to access this device, click ok
- App should open and auto show Mavic Pro, if this does not close app and reopen
- Click “go fly”
3. Resetting Ctrl+DJI back to Default:
- Pull cable out from tablet (can leave controller plugged in)
- Hit page button, left side of physical home button
- Click “Close all”
- Plug cable back into tablet
- Choose “Ctrl+DJI” app, click “Always”
- Ctrl+DJI should auto open and connect to aircraft